TM-5-2350-377-13-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER

JUNE 2012
TM-5-2350-377-13-P

  TM-5-2350-377-13-P - Page 239 of 404

FIELD MAINTENANCE
BLOCKING/UNBLOCKING THE HULL
INITIAL SETUP:
Tools and Special Tools
Stand, Vehicle (WP
0071, Table 1, Item 6)
Personnel Required
Construction Equipment Repairer, 91L (Two)
References
TM 5-2350-262-10
BLOCKING/UNBLOCKING THE HULL
To block vehicle, start the engine (TM 5-2350-262-10) and place the SPRUNG/UNSPRUNG control lever
(Figure 1, Item 2) in UNSPRUNG. Position both suspension control levers (Figure 1, Item 1) to lower front end fully.
When rear of vehicle reaches its highest position, have assistant place support stands (Figure 1, Item 3) under both
front corners of hull. Before shutting off engine (TM 5-2350-262-10), position ejector about midway in bowl. Reverse
procedure to unblock hull.
3
3
M0115HBF
1
2
Figure 1.
Blocking/Unblocking the Hull.
END OF TASK
END OF WORK PACKAGE
TM 5-2350-377-13&P
0047
0047-1/2 blank


Back to Top