FEMALE CABLE CONNECTOR (WITH WASHER) REPLACEMENT
1.
Strip cable insulation approximately 1/8 inch (3 mm) (Figure 5).
2.
Slide shell and washer over cable (Figure 5).
3.
Place cable into cylindrical end of terminal and crimp (Figure 5).
4.
Slide shell and washer over terminal (Figure 5).
M0121HBF
TERMINAL
WASHER
SHELL
CABLE
Figure 5.
Female Cable Connector with Washer.
END OF TASK
FEMALE CABLE CONNECTOR (WITH SLEEVE) REPLACEMENT
1.
Strip cable insulation approximately 1/8 inch (3 mm) (Figure 6).
2.
Slide shell and sleeve over cable (Figure 6).
3.
Insert cable in cylindrical end of terminal and crimp (Figure 6).
4.
Slide shell and sleeve over terminal (Figure 6).
M0122HBF
TERMINAL
SLEEVE
SHELL
CABLE
Figure 6.
Female Cable Connector with Sleeve.
END OF TASK
END OF WORK PACKAGE
TM 5-2350-377-13&P
0049
0049-5/6 blank