TM-5-2350-377-13-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER

JUNE 2012
TM-5-2350-377-13-P

  TM-5-2350-377-13-P - Page 251 of 404

FIELD MAINTENANCE
GENERAL HYDRAULIC SYSTEM REPAIR METHODS
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(WP
0071, Table 1, Item 7)
Materials/Parts
Lubricating Oil, Engine
(WP
0070, Table 1, Item 18, 19, 20)
Personnel Required
Construction Equipment Repairer, 91L
References
TM 5-2350-262-10
MIL-F-18866D
GENERAL HYDRAULIC SYSTEM REPAIR METHODS
This work package contains repair methods for hydraulic system. If special repair methods or procedures are
required for the hydraulic system components or parts, specific repair instructions are included in the individual
maintenance tasks.
WARNING
•
High pressure is present in the M9 ACE hydraulic system. Do not disconnect any
hydraulic system component unless hydraulic system pressure has been relieved. After
hydraulic system pressure has been relieved, wait at least four minutes before
disconnecting any hose or fitting. Failure to comply may result in severe injury to
personnel.
•
Spilled hydraulic oil is very slippery. Use caution when entering or working in bowl area.
Wipe up any spilled oil immediately. Failure to comply may result in severe injury to
personnel.
TM 5-2350-377-13&P
0051
0051-1


Back to Top