TM-5-2350-377-13-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER
JUNE 2012
TM-5-2350-377-13-P - Page 94 of 404
HYDRAULIC INSTALLATION - Continued
STEP
3.
Perform hose blockage test.
NOTE
Have suitable container ready to catch oil.
a.
Disconnect HYDR-MAN-IN-9 hose (Figure 2, Item 2) from tee (Figure 2, Item 1) at port 9
(Figure 2, Item 4) on LHMAN (Figure 2, Item 5). Plug pressure hose (Figure 2, Item 2). Add short hose
(Figure 2, Item 3) to tee (Figure 2, Item 1).
b.
While holding open end of hose (Figure 2, Item 3) in container, have assistant start engine. Check for
free flow of hydraulic oil from hose (Figure 2, Item 3).
c.
Stop engine; relieve hydraulic pressure. Disconnect hose (Figure 2, Item 3) from tee (Figure 2, Item 1)
and connect HYDR-MAN-IN-9 hose (Figure 2, Item 2) to tee (Figure 2, Item 1).
1
T00504HBF
2
3
4
5
Figure 2.
Hose Test.
CONDITION/INDICATION
Is hose blocked?
DECISION
YES - Clear blockage or replace hose (WP
0042). Verify problem is solved.
NO - Verify problem with operator.
END OF WORK PACKAGE
TM 5-2350-377-13&P
0013
0013-4
Back to Top
