TM-5-2350-377-13-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER
JUNE 2012
TM-5-2350-377-13-P - Page 95 of 404
FIELD MAINTENANCE
TROUBLESHOOTING PROCEDURES - FRONT CORNER (LEFT OR RIGHT) DOES NOT RAISE OR LOWER IN
UNSPRUNG MODE, TRACK ADJUSTING CYLINDER
INITIAL SETUP:
Tools and Special Tools
Tool Kit, General Mechanic's: Automotive
(WP
0071, Table 1, Item 7)
Parts Kit, Hydraulic (WP
0071, Table 1, Item 4)
Personnel Required
Construction Equipment Repairer, 91L (Two)
References
FO-1
References (cont.)
TM 5-2350-262-10
WP
0008
WP
0012
WP
0018
WP
0042
WP
0045
Equipment Condition
Hydraulic pressure relieved (TM 5-2350-262-20)
TROUBLESHOOTING PROCEDURE
HYDRAULIC INSTALLATION
WARNING
High pressure is present in the M9 ACE hydraulic system. Do not disconnect any hydraulic
system component unless hydraulic system pressure has been relieved. Ensure each of the
hydraulic control levers is moved several times through all positions, and the hydraulic tank
dipstick is slowly loosened to relieve pressure. Failure to comply may result in severe injury
to personnel.
TM 5-2350-377-13&P
0014
0014-1
Back to Top
