TM-5-2350-377-14-P

ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)

TM-5-2350-377-14-P - Page 197 of 335

TM 5-2350-377-14&P

0032 00-2

0032 00

HEADLIGHT WIRING HARNESS REPLACEMENT - continued

ASSEMBLY

NOTE

Steps 1 through 5 apply to Figure 83.

1. Route headlight wiring harness (item 2) through openings in top of

four braces (item 10) inside

apron (item 4) back wall, starting from left headlight to right headlight.

2. Install nut (item 6), lock washer ( item 5), flat washer (item 7), and hose clamp (item 8) to headlight wiring harness

and apron stud (item 9).

3. Connect two apron wiring harness (item 2) terminals to two apron mercury switch terminals ( item 1).

4. Connect headlight wiring harness ( item 2) to apron wiring harness ( item 3) at terminals.

5. Install LH and RH headlight assemblies, WP 0016, Assembly.

END OF WORK PACKAGE