TM-5-2350-377-14-P
ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; OPERATOR'S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) SUPPORTING THE HYDRAULIC BLADE FOLDER-TRACK TENSIONER (HBF-TT)
TM-5-2350-377-14-P - Page 202 of 335
TM 5-2350-377-14&P
CONTROL BOX POWER WIRING HARNESS REPLACEMENT - continued
5. Disconnect blade folder harness lead #514 (item 10) from control box power harness (item 7).
6. Remove control box power harness (item
7) from behind ejector panel (item
1, Figure 86).
NOTE
Step 7 and step 1 of assembly applies to Figure 88.
7. Disconnect control box power harness connector (item 7) from track and blade control box (item 11).
Figure 88.
Control Box Power Wiring Harness.
ASSEMBLY
1. Install control box power harness connector (item 7) on track and blade control box (item 11).
NOTE
Step 2 applies to Figure 89.
2. Remove four screws (item 12) from ejector panel (item 1) and move panel downward, retaining screws for future
use.
Figure 89.
Control Box Power Wiring Harness.
0034 00-3
0034 00
7
11
12
1
Back to Top
