DISASSEMBLY
CAUTION
•
Disassembly should be performed in a clean environment and protective dust covers or
caps should be installed on all openings to prevent contamination. Dirt can damage parts
and cause malfunctions.
•
When securing forward left manifold in vise, exercise extreme care not to mar any
surfaces or damage components.
1.
Remove two adapters (Figure 2, Item 3), two O-rings (Figure 2, Item 4), two adapters (Figure 2, Item 12), two
O-rings (Figure 2, Item 13), adapter (Figure 2, Item 11), O-ring (Figure 2, Item 2), adapter (Figure 2, Item 15),
O-ring (Figure 2, Item 13), two adapters (Figure 2, Item 1), and two O-rings (Figure 2, Item 2) from left forward
manifold (Figure 2, Item 14). Discard O-rings.
2.
Remove two two-way (NO) valves V3 and V9 (Figure 2, Item 10), two packing retainers (Figure 2, Item 7), two
O-rings (Figure 2, Item 8), two packing retainers (Figure 2, Item 7), two O-rings (Figure 2, Item 9), transducer
T10 (Figure 2, Item 6), and O-ring (Figure 2, Item 5) from left forward manifold (Figure 2, Item 14). Discard
O-rings and packing retainers.
7
8
7
9
7
8
7
9
11
10
2
12
13
12
13
14
13
15
13
16
2
3
4
3
4
5
6
1
M0025HDC
Figure 2.
Hydraulic Diagnostic Center (HDC) Forward Left Manifold Disassembly.
END OF TASK
TM 5-2350-378-23&P
0036
0036-4