TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 262 of 790
TM 5--2350--378--24&P
FRONT CORNER (LEFT OR RIGHT) RAISES IN SPRUNG, BUT NOT UNSPRUNG MODE --
Continued
0013 00
Figure 20. HDC Control Box
MAIN RELIEF VALVE ADJUSTMENT
Reset all HDC solenoid valves by selecting the RESET VALVES button (Figure 20,
item 1) on the HDC control box.
WARNING
S
Do not operate ejector when personnel are in bowl. Do not work in
bowl unless ejector lock is engaged. Failure to comply may result in
severe injury or death to personnel.
S
Do not stand or work in bowl area unless ejector lock is engaged.
Do not stand in bowl to observe roller guide travels. Failure to com-
ply may result in severe injury to personnel.
Continued on page 0013 00--39.
0013 00--37/38 blank
Back to Top
