TM-5-2350-378-24-P

HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9

TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

TM-5-2350-378-24-P - Page 324 of 790

TM 5--2350--378--24&P

HYDRAULIC OIL OVERHEATS -- Continued

0016 00

Figure 11. HDC Control Box

SUSPENSION RELIEF VALVE ADJUSTMENT

WARNING

S

Do not operate ejector when personnel are in bowl. Do not work in

bowl unless ejector lock is engaged. Failure to comply may result in

severe injury or death to personnel.

S

Do not stand or work in bowl area unless ejector lock is engaged.

Do not stand in bowl to observe roller guide travels. Failure to

comply may result in severe injury to personnel.

S

When folding dozer blade, work on blade latches from side of

vehicle only. Do not stand In front of dozer blade while retracting

ejector. Failure to comply may result in severe injury to personnel.

Reset all HDC solenoid valves by selecting the RESET VALVES button (Figure 11,

item 1) on the HDC control box.

Continued on page 0016 00--23.

0016 00--21/22 blank