TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 38 of 790
TM 5--2350--378--24&P
0004 00--13
INTRODUCTION TO TROUBLESHOOTING AND REPAIR OF THE M9 ACE HYDRAULIC
SYSTEM -- Continued
0004 00
5.
A four--bolt split flange has a flange head that is clamped to a smooth face. The flange head uses a
preformed packing that is squeezed between the head and the face. The face and the end of flange head
must be free of nicks and scratches to seal properly. The packing must also be free of nicks and cuts, or the
connection will leak.
CAUTION
Replace or repair parts with nicks, cuts, or scratches. Failure to comply may result in
damage to equipment.
Figure 13. Four--Bolt Split Flange
Back to Top
