TM-5-2350-378-24-P
HYDRAULIC DIAGNOSTIC CENTER (HDC) SUPPORTING ARMORED COMBAT EARTHMOVER (ACE), M9
TECHNICAL MANUAL; UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
TM-5-2350-378-24-P - Page 472 of 790
TM 5--2350--378--24&P
WINCH WILL NOT PULL RATED LOAD -- Continued
0021 00
Figure 7. HDC Control Box
WINCH RELIEF VALVE VB ADJUSTMENT
Reset all HDC solenoid valves by selecting the RESET VALVES button (Figure 7,
item 1) on the HDC control box.
WARNING
S
Do not operate ejector when personnel are in bowl. Do not work in
bowl unless ejector lock is engaged. Failure to comply may result in
severe injury or death to personnel.
S
Do not stand or work in bowl area unless ejector lock is engaged.
Do not stand in bowl to observe roller guide travels. Failure to
comply may result in severe injury to personnel.
S
When folding dozer blade, work on blade latches from side of
vehicle only. Do not stand In front of dozer blade while retracting
ejector. Failure to comply may result in severe injury to personnel.
Continued on page 0021 00--11.
0021 00--9/10 blank
Back to Top
