TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 105 of 738
TM 5-2815-241-34&P
ROCKER ARM HOUSING INSTALLATION - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
6.
Six rocker arm
studs (11)
Using 3/8-inch drive 5/8-inch socket and
ratchet handle, screw in until snug.
Do not tighten.
NOTE
When performing step 7, tighten rocker arm studs in sequence shown in Rocker Arm
Stud Tightening Sequence below.
7.
Six rocker arm
studs (11)
a.
Using 3/8-inch drive 5/8-inch socket
and 0 to 150 ft lb (0 to 210 N•m) torque
wrench, tighten to 40 to 45 ft lb (56 to
63 N•m).
b.
Tighten to 60 to 65 ft lb (84 to 91 N•m).
TASK ENDS HERE
TA 242388
2-83
Back to Top
