TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 101 of 738
TM 5-2815-241-34&P
FUEL INJECTOR INSTALLATION - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
3.
Fuel injector (1)
Using fuel injector puller, seat fuel injector.
4.
Fuel injector clamp
(5) and two
screws (6)
a.
Using 1/2-inch drive 1/2-inch socket,
6-inch extension, and ratchet handle,
screw in until screw just seats on fuel
injector clamp.
Do not tighten.
b.
Using 1/2-inch drive 1/2-inch socket,
6-inch extension, and 0 to 250 ft lb (0 to
350 N•m) torque wrench, torque two
screws to 11 to 12 ft Ib (15.4 to
16.8 N•m).
5.
Fuel injector
link (7)
Put in.
TASK ENDS HERE
TA 242386
2-79
Back to Top
