TM-5-2815-241-34-P

ENGINE, DIESEL NTC-290

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

MARCH 1987

TM-5-2815-241-34-P - Page 398 of 738

TM 5-2815-241-34&P

FUEL INJECTOR - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

TESTING - CONTINUED

84. Injector (1)

85.

86.

Plunger (2)

Injector spring (3)

Retainer plate (4)

87.

Test stand link (7)

88.

89.

Injector (1)

Burnishing tool (9)

Pull out.

Slide onto plunger and place in injector.

Place on ST-708 burnishing tool adapter (5)

and secure with pins (6).

Place in ST-708 burnishing tool

adapter (5).

Use test stand link 6.5 Inches (185

mm) long marked ST 790-331.

Place in ST-790 injector test stand making

sure Injector is in injector seat (8).

Install into injector inlet connector (10) on

ST-790 injector test stand.

TA 242591

2-376