TM-5-2815-241-34-P
ENGINE, DIESEL NTC-290
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
MARCH 1987
TM-5-2815-241-34-P - Page 399 of 738
TM 5-2815-241-34&P
FUEL INJECTOR - CONTINUED
LOCATION
90. Burnishing tool (9)
ACTION
ITEM
REMARKS
Burnishing tool
Retract by pulling out small knob (12).
needle (11)
NOTE
With burnishing tool needle retracted, burnishing tool may be left in inlet connector
during all test operations.
91. ST-790 injector
Injector inlet
test stand
connector (10)
92.
Drain line (14)
Connect by screwing in large knob section
(13) to ST-708 burnishing tool adapter (5)
inlet hole.
Screw into ST-708 burnishing tool
adapter (5).
TA 242592
2-377
Back to Top
