TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 326 of 894

TRUCK SERVICE MANUAL

ENGINE

STEAM CLEAN ENGINE EXTERIOR

Prior to steam cleaning remove all electrical components

such as cranking motor, generator or alternator and

electrical controls, as used.

NOTE

:

Cover all openings with water proof tape.

In addition to actual time-saving affected by engine

cleaning, inspections can be made more quickly and

accurately during disassembly if surfaces are clean.

A heavy-duty steam cleaner is preferred; however, any

model for general use is satisfactory.

ENGINE DISASSEMBLY

Prior to mounting engine on engine stand remove the

following:

Rock Shield

Oil Gauge and Bracket

Water Filter

Mechanical Controls, Water, Air, Fuel Connections,

Filters

and Lines

Turbocharger and Connections

Crankcase Vent

Oil Spray Nozzles

Water Transfer Tube (FFC Series)

Oil Cooler and Connections

Auxiliary Oil Cooler (if used)

Water Pump, Idler and Fan Hub (FFC Series), See

Fig’s.

0-3 and 0-4