TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 510 of 894

TRUCK SERVICE MANUAL

FUEL SYSTEM

gears on shaft 0.680 to 0.690 Inch [17.27 to 17.53 mm]

from body end of shaft.

Oil shaft before assembly.

5.

Check lubrication holes in cover and body; they must

be clean.

6.

Clean cooling kit components, if used, and dry with

compressed air.

Assembly

1.

Lubricate and slide shafts and gears into

cover.

Make sure parts are clean.

2.

Position new gasket and install body to cover.

Align

locating notches together.

Fig. 5-33.