TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 517 of 894

TRUCK SERVICE MANUAL

FUEL SYSTEM

GOVERNOR SPRING PACK

The governor spring pack consists of the idle and

maximum or high-speed springs, plungers, adjusting

screw and shims.

The springs control engine speed and

adjustments are made by the shims or adjusting screw.

Fig. 5-68

Standard Automotive Spring Pack

Disassembly

1.

Remove snap ring which holds governor spring pack

in sleeve with a pair of snap ring pliers.

1 ADOPTER

6

ADJUSTING SCREW

11 GASKET

2 IDLE SPRING PLUNGER

7

HI-SPEED SPRING

12 COYER

3 IDLE SPRING

8

SHIM

13 PLUG

4 WASHER

9

RETAINER

14 SEAL

5 GUIDE AN CLIP

10

SNAP RING

Fig. 5-68, F5148.

Standard governor - exploded view