TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

  TM-5-3805-254-14-P-2 - Page 568 of 894

TRUCK SERVICE MANUAL
FUEL SYSTEM
Heat Shield
Inspect heat shield for cracks, distortion and burned
condition, discard, If damaged.
Cracks on bore of heat
shield less than 1/2 inch [12.7 mm] long are not cause for
replacement.
Oil Seal Plate/Diffuser Plate
1.
Inspect oil seal/diffuser plate for cracks, burrs and
distortion, discard, If damaged.
2.
Check oil seal/diffuser plate bore for burrs and
scoring.
Fig. 10-17.


Back to Top