TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980
TM-5-3805-254-14-P-2

  TM-5-3805-254-14-P-2 - Page 573 of 894

TRUCK SERVICE MANUAL
FUEL SYSTEM
a.
Push shaft toward side of the bore.
b.
Using a feeler gauge, check minimum distance
between tip of wheel vanes and bore.
Clearance should
be 0.005 to 0.033 inch [0.13 to 0.84 mm] on compressor
end and 0.011 to 0.043 inch [0.28 to 1.1 mm] on the
turbine end.
Fig. 10-37.


Back to Top