TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 731 of 894

TRUCK SERVICE MANUAL

TRANSMISSIONS

Section 5. DISASSEMBLY OF TRANSMISSION

Para5-1/5-2

INTO SUBASSEMBLIES

5-1. SCOPE OF SECTION 5

This section covers the disassembly

of the transmission It is arranged in

a continuous sequence to facilitate as-

sembly Certain illustrations will not

always illustrate the model being dis- ,.,

assembled, but when the operation is

identical the illustration may be refer-

enced and will correctly illustrate the

procedure.

5-2. REMOVING EXTERNAL

X

COMPONENTS

a. Mounting Transmission In Overhaul Stand

(1) Overhaul stands, and mounting of

the

transmission therein, will vary. Figure 5-1 shows the

transmission installed in a typical overhaul stand.

(2) Before installing the lifting bracket onto the

transmission, remove any bolts which cannot be

removed due to obstruction by the bracket.

b. Removing External Components

(1) Remove the self-locking nut from the output

shaft (fig. 5-1). Remove the flange.

(2) On models having a two-bolt top cover on the

converter housing, remove two bolts 12 (A, foldout 8),

two

washers

13,

cover

14

and

gasket

15.

3i82z8