TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 737 of 894

TRUCK SERVICE MANUAL

TRANSMISSIONS

HT 700D SERIES TRANSMISSION

Para .5-7- 5-9

5-7. REMOVING CONVERTER HOUSING

a. Housing

with 2-Bolt Top Cover (no retarder)

(1) From inside the converter housing, remove the

two screws and washers that retain the pitot tube or (fig.

5-25).

(2) Remove seven bolts and washers from the

inside of the converter housing (fig.5-25).

(3) Remove nine bolts and washers retaining the

converter housing to the transmission housing. Two bolts

were removed before the installation of the lifting bracket.

Refer to figure 5-1.

(4) Remove the converter housing from the

transmission housing with the lifting sling and place it on

the work table (fig. 5-26).

(5) Refer to paragraph 6-9 for rebuild of the

converter housing assembly.

(6) Remove the pitot tube or steel block (fig. 5-26).

freed in item (1), above.