TM-5-3805-254-14-P-2

TRUCK, DUMP, 20 TON, 6X4, ON-OFF HIGHWAY 71,000 GVW, IHC MODEL F-5070 (CCE)

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT AND DEPT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS INFORMATION AND SUPPLEMENTAL MAINTENANCE INSTRUCTIONS)

JUNE 1980

TM-5-3805-254-14-P-2 - Page 742 of 894

TRUCK SERVICE MANUAL

TRANSMISSION

Para

5-13

DISASSEMBLY

(5)

Refer to paragraph 6-19 for rebuild of the

center support assembly.

(6)

Attach lifting bracket 16 (fig. 4-2) to the main

shaft of the gear unit assembly (fig. 5-45).

(7)

Attach a hoist to the lifting bracket eyebolt and

remove the gear unit and shaft assembly from the

transmission housing (fig. 5-45).

(8)

Refer to paragraph 6-26 for rebuild of the gear

unit and shaft assembly.

(9)

Remove the snapring that retains the second-

clutch plates (fig. 5-37).

Remove the 13 second-clutch

plates.

NOTE

Tie the second-clutch plates together, and

identify the pack.

Identification is required at

assembly.

(10)

Remove the two bolts retaining the tool 8 (fig.

4-2), adapter housing and gasket to the transmission

housing (fig. 5-45).

Remove the tool, housing and

gasket.

(11)

Refer to paragraph 6-23 for rebuild of the

transmission housing.

735