TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 178 of 660

DISASSEMBLY - Continued

NOTE

Perform Steps 4 through 10 to disassemble control box.

4.

Loosen four twist-lock screws (Figure 2, Item 3) and remove cover (Figure 2, Item 4) from control box

(Figure 2, Item 1).

5.

Remove gasket (Figure 2, Item 2) from cover (Figure 2, Item 4).

Figure 2.

MCS Control Box Cover Disassembly.

NOTE

Perform Steps 6 through 8 for each of four switches.

6.

Loosen two screws (Figure 3, Item 3) and disconnect two wires (Figure 3, Item 2) from switch

(Figure 3, Item 4).

NOTE

Note position of switch and retainer for assembly.

7.

Remove switch (Figure 3, Item 4) and retainer (Figure 3, Item 5) from switch housing (Figure 3, Item 8).

8.

Remove ring (Figure 3, Item 6), switch housing (Figure 3, Item 8), and data plate (Figure 3, Item 7) from

cover (Figure 3, Item 1).

TM 5-3805-264-13&P

0023

0023-2