TM-5-3805-264-13-P

TRUCK, DUMP, HEAVY, BODY M917A1 AND M917A2

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2014

TM-5-3805-264-13-P - Page 180 of 660

ASSEMBLY

NOTE

Perform Steps 1 through 7 to assemble control box.

1.

Install bushing (Figure 5, Item 6) and nut (Figure 5, Item 5) on control box (Figure 5, Item 4).

2.

Install end of cable (Figure 5, Item 1), grommet (Figure 5, Item 3), and locking plug (Figure 5, Item 2).

Figure 5.

MCS Control Box Cable Assembly.

NOTE

Perform Steps 3 through 5 for each of four switches.

3.

Install data plate (Figure 6, Item 7), switch housing (Figure 6, Item 8), and ring (Figure 6, Item 6) on cover

(Figure 6, Item 1).

4.

Install retainer (Figure 6, Item 5) and switch (Figure 6, Item 4) on switch housing (Figure 6, Item 8).

5.

Connect two wires (Figure 6, Item 2) to switch (Figure 6, Item 4) and tighten two screws (Figure 6, Item 3).

TM 5-3805-264-13&P

0023

0023-4