ASSEMBLY - Continued
8.
Install jumper wire (Figure 8, Item 7) on connector (Figure 8, Item 5).
9.
With cable (Figure 8, Item 8) through connector housing (Figure 8, Item 3), install connector
(Figure 8, Item 5) on wires of cable with seven screws (Figure 8, Item 6). Push connector into connector
housing.
10.
Install clamp (Figure 8, Item 2), screw (Figure 8, Item 1), and screw (Figure 8, Item 4).
Figure 8.
MCS Remote Control Plug Assembly.
END OF TASK
FOLLOW-ON MAINTENANCE
Check operation of MCS remote control (WP 0005).
END OF TASK
END OF WORK PACKAGE
TM 5-3805-264-13&P
0023
0023-6