TM-5-3895-371-24-P

BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 1981

TM-5-3895-371-24-P - Page 168 of 330

TM 5-3895-371-24 & P

(9)

Slip out return plate (32, fig. 3-23) and piston assemblies (31). Pick wear plate (34)

from cam assembly (42).

NOTE

On a major overhaul, replace trunnion bearings (40,

fig. 3-4), regardless of conditions.

(10)

Inspect cam assembly (42) for damage. Remove any burrs or nicks from the face of the

cam with a fine stone. Inspect trunnion bearings (40) for galling, roughness, or cracked cages. If damag-

ed, press trunnion bearings from cam assembly (42) using an arbor press and a plug 1-1/2 in. in diameter.

Figure 3-23. Removing Cam Reaction P/ate.

3-23