TM-5-3895-371-24-P

BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 1981

TM-5-3895-371-24-P - Page 162 of 330

TM 5-3895-371-24 & P

(10)

Remove self-locking nut (31, fig. 3-10), washer (32), and piston assembly (27) from

plunger assembly (30).

(11)

Inspect four studs (21). Remove only if the threads have been damaged or if the studs

are twisted or broken.

(12)

Remove four capscrews (1, fig. 3-16), lockwashers (2), cover (3), and gasket (4). (Refer

to fig. 3-10.)

Figure 3-16.

Control Housing

Cover.

i. Disassemble Hydraulic Pump (Continued).

(1)

From both sides of the housing (24, fig. 3-17), remove eight capscrews (25) and eight

lockwashers (26). Pull out trunnions (27), gaskets (28) and bearings (29). (Refer to fig. 3-4.)

Figure 3-17. Removing Trunnions.

3-17