TM-5-3895-371-24-P

BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 1981

TM-5-3895-371-24-P - Page 163 of 330

TM 5-3895-371-24 & P

NOTE

At the factory each block is marked to indicate

cylinder bore number 1. Mark piston number 1

with felt pen or a similar device as a convenient

method-of preserving the bore/piston relation-

ship. (Refer to fig. 3-19.)

(2)

Mark No. 1 piston assembly (31, fig. 3-19) and block assembly (30) maintaining bore/

piston relationship. Slide block assembly out of housing.

(3)

(4)

assembly lever

(5)

lever assembly.

Remove eight capscrews (56, fig. 3-4) and lockwashers (20) from mounting flange (55).

Remove housing (24), as shown in figure 3-18, by lifting housing and working over cam

(42).

Aline oil hole with trunnion and remove cylinder block so housing can clear control

Figure 3-18.

Removing Housing.

3-18