TM-5-3895-371-24-P

BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 1981

TM-5-3895-371-24-P - Page 181 of 330

TM 5-3895-371-24 & P

(19)

Install new O-ring (54) on mounting flange (55). Lower housing (24) carefully over

rotating group and on to mounting flange (55) being careful not to disturb the assembled, internal

parts. (Refer to fig. 3-40.) Carefully place block assembly (30, fig. 3-4) onto pistons alining oil cavity

with trunnion (27). Install capscrews (56) and lockwashers (20) and tighten, but do not torque.

Figure 3-40. Positioning Pump Housing.

3-36