TM-5-3895-371-24-P

BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63

TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST

MARCH 1981
TM-5-3895-371-24-P

  TM-5-3895-371-24-P - Page 187 of 330

TM 5-3895-371-24 & P
Figure 3-49. Checking Charge Pump Clearance.
(31)
Install new O-ring (5, fig. 3-4) to outside of spacer assembly (7). The direction of pump
rotation is Indicated by an arrow cast on the charge pump cover. To operate properly, the plate (4)
must be installed to correspond with the porting in the pump cover (3). Install plate over roll pin in
spacer assembly (7). (Refer to fig. 3-50.)
Figure 3-50. Charge Pump Upper Valve Plate.
(32)
From pump cover (3, fig. 3-4), remove all shims for testing.
3-42


Back to Top