TM-5-3895-371-24-P
BITUMINOUS DISTRIBUTOR BODY M918, MODEL D-63
TECHNICAL MANUAL; ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LIST
MARCH 1981
TM-5-3895-371-24-P - Page 43 of 330
TM 5-3895-371-24 & P
Figure 2-2.
Bumper Terminal Board Wiring Connectors.
2-10. Body Lamps Wire Harness Routing.
a.
Removal of Harness. (See
fig. 2-3.)
(1)
Remove connector (9) from male connector on lower left rear corner of body by
pushing in and turning lockring to the left.
(2)
Drop connector (9) with body lamps harness (8) down over frame rail.
(3)
Remove six wire clips (1) and screws (2).
(4)
On front of walkway at amber clearance lamps, snip off brown wire at each lamp.
2-20
Back to Top
