TM-5-3895-372-10

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; OPERATION INSTRUCTIONS

OCTOBER 1979

  TM-5-3895-372-10 - Page 8 of 184

TM 5-3895-372-10
WARNING
EXHAUST SYSTEM COMPONENTS CAN CAUSE SEVERE BURNS
During normal operation the exhaust pipe and muffler can become very hot.
Be careful not to touch these components
with your bare hands.
Do not allow your body to come in contact with the pipe or muffler. Exhaust system components
may be hot enough to cause serious burns.
AVOID CONTACT WITH CEMENT AND WET CONCRETE
Prolonged contact with cement or wet concrete can cause skin irritation or burns. During loading operations with cement
or while working with wet concrete, take every precaution to avoid contact with skin.
Skin areas that have been exposed
either directly or through saturated clothing should be washed thoroughly with water. If any cement or concrete material
gets into the eye, flush immediately with water and GET PROMPT MEDICAL ATTENTION.
CEMENT DUST CAN BE HARMFUL
During loading operations or at any time there is cement dust in the air, take precautions to avoid direct inhalation of the
dust.
If you must be in the immediate vicinity of the dust, wear a dust mask; or if none is available, cover your nose and
mouth with a cloth. CEMENT DUST CAN CAUSE SERIOUS LUNG PROBLEMS.
MOVING MACHINERY IS DANGEROUS
When working in the area of the V-belts on the main drive, the cement and dry admix chain drives, or the mixing trough
auger, be extremely careful to avoid contact with or catching clothing in moving parts.
Serious injury or loss of life can
result from entanglement in moving machinery.
CHECK AREA BEFORE LOWERING TROUGH
Be sure all personnel are clear before you begin to lower the mixing trough.
b


Back to Top