TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 210 of 694

TM 5-3895-372-20

ADMIX SYSTEMS.

6-8.

STRAINER SERVICE (Continued).

LOCATION/ITEM

ACTION

REMARKS

A.

REMOVAL.

NOTE

Each liquid admix system has a strainer screen. The procedure below may be used to clean the hi-flow or

the low-flow strainer.

NOTE

Close solution gate valve adjacent to strainer, if tank is full.

1. Draincock (5).

Open.

2. Draincock (5) and

Remove.

bushing (4).

3. Cap (3).

Unscrew and remove.

Use a six point socket.

Remove screen (2).

B.

CLEANING AND INSPECTION.

4. Screen (2).

a.

Clean. Use cleaning agent

recommended by admixture

manufacturer.

Then use water.

b.

Inspect for:

Replace if necessary.

(1)

Cracks

(2)

Breaks

(3)

Deformities.

5. Housing (1).

Wash out any sediment.

C. INSTALLATION.

6. Screen (2).

Place in housing (1).

7. Cap (3).

Screw on and tighten.

Use a six point socket

8. Draincock (5) and

Install bushing (4).

9. Draincock (5).

Close.

6-16