TM-5-3895-372-20

CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL

AUGUST 1980

TM-5-3895-372-20 - Page 437 of 694

TM 5-3895-372-20

MIXER-AUGER SYSTEM.

9-10. MIXER AUGER MAINTENANCE (Continued).

LOCATION/ITEM

ACTION

REMARKS

A. REMOVAL (Continued)

15.

Motor 128) and mixer-

auger (33).

16.

Two bolts (31) and

locknuts (30).

17.

Mixer-auger hub (32).

18.

Motor (28), key (29),

flexible mount (27),

and end plate (26).

B. INSTALLATION.

19.

Motor (28), key (29),

flexible mount (27),

and end plate (26).

20.

Two bolts (31) and

locknuts (30).

21.

Motor (28) and mixer-

auger (33).

Remove from trough.

Loosen.

Wedge a screwdriver into

the slots.

Remove from mixer-auger

(33).

a.

Place key in motor shaft.

b.

Install motor (28) with

flexible mount (27) and

end plate (26) attached,

into mixer-auger hub (32).

Install thru mixer-auger hub

(32) and tighten.

Install in trough.

Be careful not to split the hub,

or "lock" tool into hub.

Remove screwdriver from slots

of mixer-auger hub, if used.

9-20