TM-5-3895-372-20
CONCRETE-MOBILE MIXER BODY M919, MODEL 8CM-24/F
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL
AUGUST 1980
TM-5-3895-372-20 - Page 504 of 694
TM 5-3895-372-20
HYDRAULIC SYSTEM.
10-12.
TACHOMETER AND TACHOMETER CABLE MAINTENANCE (Continued).
LOCATION/ITEM
ACTION
REMARKS
A.
REMOVAL (Continued).
5.
Inner cable (17).
Pull out of tach drive (15).
6.
Cable (18).
Remove from tachometer.
7.
Screw (1),
lock washer
Remove from bracket (5).
(2) and nut (3).
8.
Nut (8) and
Unscrew and remove bracket (6).
washer (7).
9.
Bracket (5).
Remove from tachometer (4).
10.
Inner cable (17)
Pull internal cable (17) from
and cable (18).
cable (18).
B.
INSTALLATION.
NOTE
If the inner cable (17) is damaged,
you may pull it out and put a new inner cable in the old cable (18).
Make certain new cable is the same length as the old one.
You may also replace inner cable and cable as
a unit.
11.
Inner cable (17).
Apply grease and install in
cable (18).
12.
Bracket (5).
Install and secure using two
screws (1),
two lock washers (2).
and three nuts (3).
13.
Tachometer (4).
Install through bracket (5) and
secure with bracket (6),
two
lock washers (7) and two nuts
(8).
14.
Bracket (11).
Install and secure with screw
(12),
lock washer
I10),
and
nut (9).
15.
Cable (18).
Install on tachometer (4).
10-34
Back to Top
