TM-5-3990-263-13-P

PALLET, ADAPTER, BRIDGE, M15

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

APRIL 2012

TM-5-3990-263-13-P - Page 391 of 728

FIELD MAINTENANCE

REAR GUIDE REPAIR

INITIAL SETUP:

Tools and Special Tools

Tool Kit, General Mechanics: Automotive

(WP

0078, Table 2, Item 2)

Materials/Parts

Locknut (WP

0082, Table 1, Item 24) Qty:

11

Lockwasher (WP

0082, Table 1, Item 50) Qty:

5

Cotter Pin (WP

0082, Table 1, Item 38)

Locknut (WP

0082, Table 1, Item 25)

Spring Pin (WP

0082, Table 1, Item 28)

References

Parts Manual (WP

0073, Figure 5)

References (cont.)

WP

0038

WP

0070

Equipment Condition

Load removed from the BAP. (WP

0008)

BAP removed from the CBT. (WP

0006)

REMOVAL

WARNING

Support BAP rear guide in place when removing pivot pin. Failure to comply may result in

serious injury or death to personnel.

NOTE

•

Rear guide latch handle must be in locked position and rear guide in full open position

before performing task.

•

This task can be used for either curb-side or road-side rear guide. Road side is shown.

1.

Remove 11 screws (Figure 1, Item 1) and locknuts (Figure 1, Item 2) from rear guide pad (Figure 1, Item 3)

and rear guide (Figure 1, Item 4). Discard locknuts.

TM 5-3990-263-13&P

0045

0045-1