TM 5-4210-249-13&P-3
0418-1
DRAFT
0418
FIELD LEVEL MAINTENANCE
PUMP OPERATOR’S PANEL ELECTRIC VALVE CONTROL REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
•
Driver main inlet and passenger side aux. inlet electric valve controls are equipped with
two connectors.
Tank fill and re-circulating line electric valve control is equipped with
three connectors.
Tank fill and re-circulating line electric valve control shown.
•
Tag and mark connectors prior to removal to ensure proper installation.
1.
Disconnect three connectors (1).
2.
Remove four screws (2), washers (3), and electric valve control (4) from pump panel (5).
END OF TASK
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT00348
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
References
WP 0615, Fig. 56
Equipment Conditions
Batteries disconnected (TM 9-2320-325-14&P)
Pump panel housing opened (WP 0325)