TM 5-4210-249-13&P-3
0458-1
DRAFT
0458
FIELD LEVEL MAINTENANCE
PUMP HOUSE WIRE HARNESS REPLACEMENT
INITIAL SETUP:
REMOVAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
NOTE
•
Tag and mark connectors and wires prior to removal to ensure proper installation.
•
Note position and remove cable ties, split looms, and cushion clips as required.
•
Note routing of wire harness prior to removal to ensure proper installation.
1.
Open passenger side pump house access door (1) (WP 0010).
2.
Disconnect passenger side drain work light connector (2) from pump house wire harness connector (3).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TFFT03263
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0622, Item 27)
Materials/Parts
Tags, Identification (WP 0625, Item 51)
Ties, Cable, Plastic (WP 0625, Item 58)
Compound, Sealing (WP 0625, Item 17)
Lockwasher (8)
Locknut (2)
Lockwasher (6)
References
WP 0010
WP 0615, Fig. 95
Equipment Conditions
Pump house panels G, I, O, Q, and S
removed (WP 0540)
Pump house panel A opened (WP 0539)
Crew cab access panels removed (WP 0499)
Pump operator’s panel housing
opened (WP 0325)