TM-5-5420-202-10
LAUNCHER, M48A5 TANK CHASSIS
OPERATOR'S MANUAL
DECEMBER 2009
TM-5-5420-202-10 - Page 100 of 535
0011
TM 5-5420-202-10
USING BATTERY POWER
NOTE
Joysticks used to control mast assembly functions are spring loaded and return to their
neutral positions automatically when released.
1. If vehicle power cable (Figure 7, Item 3) is connected to viewer, set NIGHT VISION switch (Figure 7, Item 1) to
OFF.
2. Disconnect power cable (Figure 7, Item 3) from viewer receptacle (Figure 7, Item 2) and connect to dummy
receptacle (Figure 7, Item 4).
3. Install cover (Figure 7, Item 5) on viewer receptacle (Figure 7, Item 2).
NOTE
Battery is stowed in viewer carrying case with one spare.
4. Unscrew battery cap (Figure 7, Item 6) and insert battery (refer to WP 0079, Item 6), recessed positive (+)
end f rst.
5. Reinstall battery cap (Figure 7, Item 6).
Figure 7.
Using Battery Power.
END OF TASK
0011-6
Back to Top
