TM-5-5420-202-10
LAUNCHER, M48A5 TANK CHASSIS
OPERATOR'S MANUAL
DECEMBER 2009
TM-5-5420-202-10 - Page 351 of 535
TM 5-5420-202-10
0050
INSTALLATION
1. Install center guide (Figure 2, Item 1), cap (Figure 2, Item 3), and bolt (Figure 2, Item 4) in track link
(Figure 2, Item 5).
NOTE
Have f eld mechanic torque nut to specif cation. If f eld mechanic is not available, tighten
nut and have f eld mechanic torque it as soon as possible.
2. Use 1-5/16 inch socket, 4-5/8 inch socket wrench extension, hinged handle, and extension handle to install nut
(Figure 2, Item 2) on bolt (Figure 2, Item 4).
3. Tighten track tension. Refer to WP 0053 or WP 0054.
Figure 2.
Center Guide Installation.
END OF TASK
ENDOFWORKPACKAGE
0050-3/4 blank
Back to Top
