TM-5-5420-202-10
LAUNCHER, M48A5 TANK CHASSIS
OPERATOR'S MANUAL
DECEMBER 2009
TM-5-5420-202-10 - Page 361 of 535
TM 5-5420-202-10
0053
TEST AND INSPECTION
NOTE
• Undercut is located on two teeth only.
• Vehicle may be equipped with drive sprockets having no undercut. In this case, wear will
be measured quarterly by f eld maintenance personnel.
1. Check for undercut (Figure 3, Item 2) on sprocket tooth (Figure 3, Item 1).
2. If wear has eliminated undercut, notify f eld maintenance.
Figure 3.
Measuring Track Drive Sprocket Wear.
END OF TASK
ENDOFWORKPACKAGE
0053-3/4 blank
Back to Top
