TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 259 of 734

TM 5-5420-202-20-2

FUEL LINE INSULATOR REPLACEMENT (Sheet 1 of 10)

PROCEDURE INDEX

PROCEDURE

PAGE

Removal

7-42

Installation

7-47

TOOLS: 1/2 in combination box and open end wrench (2 required)

1/2 in. socket with 3/8 in. drive

5 in. extension with 3/8 in. drive

Ratchet with 3/8 in. drive

Torque wrench with 3/8 in. drive (0-200 lb-in) (0-23 N m)

SPECIAL TOOLS:

1/2 in. crowfoot wrench with 3/8 in. drive

PRELIMINARY PROCEDURES:

Remove top deck (page 16-21)

Remove powerplant (page 5-2)

Remove cooling fan shroud (page 9-47)

Remove engine access cover (right bank) (page 6-107)

Remove engine access cover (left bank) (page 6-1 12)

REMOVAL:

1.

Using two 1/2 inch wrenches, remove two bolts (A) and nuts (B) holding insulators (C)

and plate (D) to support (E). Remove insulators (C) and plate (D).

2.

Using two 1/2 inch wrenches, remove insulators and plate from support (F), (G), (H), (J),

and (K), same as step 1 above.

Go on to Sheet 2

7-42