TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 251 of 734

TM 5-5420-202-20-2

WATER SEPARATOR FUEL FILTER OUTLET HOSE ASSEMBLY REPLACEMENT (Sheet 1 of 3)

TOOLS: 9/16 in. combination box and open end wrench

7/8 in. combination box and open end wrench

SPECIAL TOOLS:

Ground hop kit (Item 31, Chapter 3, Section I)

SUPPLIES:

Rags (Item 65, Appendix D)

Gloves (Item 69, Appendix D)

Sealing compound (Item 27, Appendix D)

Goggles (Item 70, Appendix D)

Drain pan

Dry cleaning solvent (Item 55, Appendix D)

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-2)

Drain fuel-water separator (page 7-21, steps 1 thru 6)

REMOVAL:

1. Using 9/16 inch wrench, remove self-locking

nut (A) and hose clamp (B) from hose assembly

(C).

2. Using 7/8 inch wrench, remove hose assembly (C)

from bulkhead elbow (D).

NOTE

Use suitable container to catch

fuel spillage whenever any fuel

line or fitting is loosened or re-

moved. Use cloth to wipe any

spillage.

Discard cloth and

drained fuel in accordance with

local procedures.

Go on to Sheet 2

7-34