TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 246 of 734

TM 5-5420-202-20-2

TUBE ASSEMBLY (FUEL INJECTION PUMP INLET TO BULKHEAD ELBOW)

REPLACEMENT (Sheet 1 of 5)

PROCEDURE INDEX

PROCEDURE

Removal

Cleaning and Inspection

Installation

PAGE

7-29

7-31

7-31

TOOLS:

5/16 in. combination box and open end wrench

3/4 in. combination box and open end wrench

7/8 in. combination box and open end wrench

1 in. combination box and open end wrench

Wire brush

3/8 in. socket with 3/8 in. drive

Ratchet with 3/8 in. drive

SPECIAL TOOLS:

Ground hop kit (Item 31, Chapter 3, Section I)

SUPPLIES:

Rags (Item 65, Appendix D)

Gloves (Item 69, Appendix D)

Drain pan

Goggles (Item 70, Appendix D)

Dry cleaning solvent (Item 55, Appendix D)

Lockwashers

Self-locking nuts

PRELIMINARY PROCEDURES:

Remove powerplant (page 5-2)

Remove cooling fans (page 9-55)

Go on to Sheet

7-29