TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 240 of 734

TM 5-5420-202-20-2

FUEL PUMP TO FUEL WATER SEPARATOR HOSE ASSEMBLY REPLACEMENT (Sheet 4 of 5)

INSTALLATION:

NOTE

Apply sealing compound to male pipe

threads before installation.

1.

2.

3.

Install hose assembly (A) to elbow (B).

Using 7/8 inch wrench, tighten

nut (C) to elbow (B).

Using 7/8 inch wrench, install

hose assembly (A) to fuel pump (D).

TEST:

1.

Connect engine for powerplant ground

hop (page 5-26).

2.

Using 7/16 inch wrench, turn fuel-water

separator bleed cap (A) to the left until

loose.

Go on to Sheet 5

7-23