TM-5-5420-202-20-2

M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4

OCTOBER 1985

TM-5-5420-202-20-2 - Page 256 of 734

TM 5-5420-202-20-2

ENGINE FUEL PUMP REPLACEMENT (Sheet 3 of 3)

2. Using cloth, wipe all removed parts dry.

3. Inspect fuel pump gear shaft for excessive wear or break. If defective, replace fuel

pump.

4. Inspect fittings and mounting hardware for cracks, wear, or thread damage. Replace

parts if required.

Installation :

1.

2 .

3.

4.

5.

6.

7.

8.

NOTE

Coat all male threads of fittings with sealing compound before installing.

Using pipe wrench, install

two elbows (A) to fuel pump

(B).

Install new gasket (C) to

adapter (D).

Mount fuel pump (B) to adapter (D).

Using 1/2 inch wrench, install

four nuts (E) and flat washers

(F) to fuel pump (B).

Using 7/8 inch wrench, install hose

assemblies (G) to fuel pump (B).

Service fuel tanks (TM 5-5420-202-10).

Using ground hop kit, perform powerplant test run (page 5-25).

Install powerplant (page 5-14).

End of Task

7-39