TM-5-5420-202-20-2
M60A1 CHASSIS, TRANSPORTING; FOR BRIDGE, ARMORED-VEHICLE-LAUNCHED; SCISSORING TYPE, CLASS 60
TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE MANUAL; VOLUME 2 OF 4
OCTOBER 1985
TM-5-5420-202-20-2 - Page 32 of 734
TM 5-5420-202-20-2
POWERPLANT REPLACEMENT (Sheet 4 of 21)
12.
13.
14.
Using spanner wrench, disconnect four electrical harness connectors (M) at both sides
of powerplant.
Using screwdriver, loosen two clamps (N) which hold air cleaner outlet hose (P) at each
side of powerplant.
Disconnect air cleaner outlet hoses (P).
openings.
Make sure you cover air cleaner outlet hose
NOTE
If your vehicle is equipped with a
2DA engine, do steps 14.1 and 14.2.
If not,
14.1
14.2.
proceed to step 15.
Using screwdriver, loosen two clamps
(P.1).
Slide hose (P.2) off manifold (P.3) and
back onto tube (P.4).
Go on to Sheet 5
Change 1
5-5
Back to Top
