TM 5-5420-202-20-2
POWERPLANT REPLACEMENT (Sheet 11 of 21)
40.
Using hoist with sling, position sling
over powerplant so “T” end is to front
of vehicle.
41.
Attach four chain hooks of sling to four
lifting eyes on powerplant. Make sure
hook ends are toward outside of power-
plant.
42.
Have persons station themselves to
help guide powerplant as it is hoisted
out of vehicle.
Be careful when lifting powerplant.
Serious injury to personnel can
result from careless handling. Also,
powerplant can be damaged if
bumped against hull.
43.
Lift powerplant in short, even lifts.
44.
Move hoist rearward between lifts.
Rear of powerplant comes out first.
Go on to Sheet 12
5-12